The most common kind of mold you’ll find in your house is mold in the basement. The basement is underground and is often not as well developed as the rest of the house, making it the perfect breeding place for mold. It’s often a storage area with little heat, and it’s also a place where moisture can collect due to condensation on pipelines or even a leak. If you do not watch the conditions, such as excess moisture and dampness, which are good breeding grounds for basement mold, mold can really grow in the basement.
How to Get Rid of Basement Mold
Basement mold is a common problem in houses. When interior humidity is high and moisture from water leaks exists, mold grows. Mold can be recognized by the existence of black specks on wet, water-damaged areas. Here are some simple yet efficient techniques to get rid of mold in your basement.
1. Wear protective clothing.
Wear protective clothes before starting. All are advised to wear a long-sleeved shirt, long pants or overalls, boots, latex or workingman gloves that reach up to the forearm, cap, and a full-face respirator mask. Eye goggles will increase your protection even more. After donning your protective clothing, you will be completely protected from skin disorders, asthma, allergies, and eye irritations.
2. Find the source of the water leak.
Find all potential entry points for water and get them fixed or sealed. Possible causes include leaking flooring, ceilings from above, pipelines and water system leaks, and access sites throughout floods. In addition, water seeps in due to faults in the construction and poor maintenance. Learn more from professional property restoration to find the source of the water leak.
3. Identify all infested areas.
Find all mold-infested areas in the basement. These are typically seen on the behinds of paneling, wallpaper, carpets, and wood and wood products. Basement mold is likely to be present without visible mold evidence, but a musty smell abounds.
4. Scrub the surfaces.
Scrub hard surfaces with a brush or scouring pad soaked in warm water and mild laundry detergent if mold shows up. Allow time for drying. Then wipe the spot with a home-remedy fungicide and wait 20 minutes. Repeat and wait for 20 minutes. Lastly, use a detergent solution that contains borate as one of its ingredients to clean the area. There is no need to rinse.
5. Spray some fungicide.
Fill a sprayer with fungicide and apply two coats to the basement’s walls, pipes, ceiling, and other mold-infested places. Then, for one to two hours, immediately fan-dry the room to eliminate excess moisture. If you’re having trouble removing mold, seek help from professional mold removal services.
Conclusion
When you discover that you have mold in your basement, you should first identify the mold source. If you see leaks or excess moisture, you must address the problem immediately to avoid the moisture from returning and the mold from spreading.
You’ll need to deal with basement mold elimination. Mold removal can be accomplished with a variety of sprays and cleaners available on the marketplace. You should ensure that the place is completely dry after cleaning to avoid basement mold from returning.
Related Posts
